Bibliothèque Ecole Nationale Polytechnique

Electronique

Détails

Catégorie : Uncategorised

Publié le mardi 14 juin 2016 10:36

• modern payment methods improving the effectiveness of social benefit system – implementation failure in the czech republic
• international symposium on the eletronic structure and properties of molecules and crystals
• impact during their use, disposal and recyclingeletronic co-ordinate determination
• ql9 development and validation of an eletronic version of the health assessment questionnaire disability index (haq-di)
• avaliação de desempenho humano na esfera pública: estado da arte na literatura internacional e nacional
• Rbo print or eletronic?
• A New Flicker Detection Method for New Generation Lamps Both Robust to Fundamental Frequency Deviation and Based on the Whole Voltage Frequency Spectrum
• Energy-Efficient Scheduling of Periodic Applications on Safety-Critical Time-Triggered Multiprocessor Systems
• The Kernel Based Multiple Instances Learning Algorithm for Object Tracking
• Dual-Input Single-Output Isolated Resonant Converter with Zero Voltage Switching
• Practical Energy Harvesting for Batteryless Ambient Backscatter Sensors Practical Energy Harvesting for Batteryless Ambient Backscatter Sensors
• energy conservation in domestic refrigerators by cooling compressor shell – a case study
• interoperable information exchange as enabler of nff related tes
• dynamic improved path planning for mobile beacon in wireless sensor network
• inteligência competitiva como inovação nos processos de negócio
• analysis of mobility on universities campuses in metropolises of emerging countries through the combination of inductive reasoning and monographic procedure methods
• pmh4: comparative tolerability of new antipsychotic drugs in schizophrenia: a systematic review and meta-analysis
• plla synthesis and nanofibers production: viability by human mesenchymal stem cell from adipose tissue
• portraying innovation in the public service of brazil: frameworks, systematization and characterization
• AVSynDEx: A Rapid Prototyping Process Dedicated to the Implementation of Digital Image Processing Applications on Multi-DSP and FPGA Architectures
• A Robust Iris Identification System Based on Wavelet Packet Decomposition and Local Comparisons of the Extracted Signatures
• Embedded Systems for Intelligent Vehicles
• Special issue on 10years of cognitive radio: state-of-the-art and perspectives
• On the parallel efficiency and scalability of the correntropy coefficient for image analysis 

•  Three Topologies of a Non-Isolated High Gain Switched-Inductor Switched-Capacitor Step-Up Cuk Converter for Renewable Energy Applications
• More Discussions on Intrinsic Frequency Detection Capability of Full-Rate Linear Phase Detector in Clock and Data Recovery
• Method of Estimating Human Orientation Using Array Antenna
• Prediction of the Nonlinearity by Segmentation and Matching Precision of a Hybrid R-I Digital-to-Analog Converter
• A Control Methodology for Load Sharing System Restoration in Islanded DC Micro Grid with Faulty Communication Links  Open AccessArticle
• Practical Energy Harvesting for Batteryless Ambient Backscatter Sensors 
• Practical Energy Harvesting for Batteryless Ambient Backscatter Sensors

• antibacterial activity of baccharis dracunculifolia in planktonic cultures and biofilms of streptococcus mutans

• disruptive innovation in low-income contexts: challenges and state-of-the-art national research in marketing

• subjectivity versus brazilians universities’ demand for objectivity; from sublimation to psychoneurosis

• factors influencing the use of electronic government services in brazil

• material consumption and dry film thickness in spray coating process

• an improved extrapolation method and its application in ultrasound computerized tomography

• a systematic review for sudden cardiac death in hypertrophic cardiomyopathy patients with myocardial fibrosis: a cmr lge study

• factors associated to late-term abortion after rape: literature review

• a suite of java message-passing benchmarks to support the validation of testing models, criteria and tools

• improving maintenance activities by the usage of bol data

• the comparison of mental skills in elite and sub-elite male and female volleyball players

• an indirect space-vector modulated three-phase ac-dc matrix converter for hybrid electric vehicles

• avaliação e classificação da capacidade física aeróbia de atletas de basquetebol em cadeira de rodas

• factors and competitiveness analysis in rare earth mining, new methodology: case study from brazil

• from print to screen: changes and challenges facing the brazilian publishing industry 

• Detectors on Edge Nodes against False Data Injection on Transmission Lines of Smart Grid
• Real-Time Ventricular Fibrillation Detection Using an Embedded Microcontroller in a Pervasive Environment
• Impact Responses and Parameters Sensitivity Analysis of Electric Wheelchairs
• Phase Difference Measurement Method Based on Progressive Phase Shift
• OAll SiC Grid-Connected PV Supply with HF Link MPPT Converter: System Design Methodology and Development of a 20 kHz, 25 kVA Prototype
• Practical Energy Harvesting for Batteryless Ambient Backscatter Sensors 
• Practical Energy Harvesting for Batteryless Ambient Backscatter Sensors
• an empirical evaluation of the cost and effectiveness of structural testing criteria for concurrent programs
• fault diagnosis based on swpt and hilbert transform
• product production complexity research: developments and opportunities
• neutrophil dysfunction varies with the stage of canine visceral leishmaniosis
• fabrication methods of phantoms simulating optical and thermal properties
• the descriptive complexity of the deterministic exponential time hierarchy
• influence of solder pads to perc solar cells for module integration
• muscle endothelial-dependent microvascular dysfunction in adulthood due to early postnatal overnutrition
• sensorineural hearing loss in acromegalic patients under treatment
• reuse of norgestomet implants in an ecg-based superovulation protocol administered to nelore (bos taurus indicus) cows
• low-temperature synthesis and characterisation of ultra-small cadmium selenide quantum dots in octadecene solution
• the survey relationship between office automation and employees performance in the yield tax affairs office
• the effect of temperature on a double-barrier generator of terahertz coherent phonons
• thermal management of electronic systems ii: proceedings of eurotherm seminar 45, 20–22 september 1995, leuven, belgium: edited by e. Beyne, c. J. M. Lasance and j. Berghmans. Kluwer academic publishers, dordrecht. (1997). 359 pages. $169.00, nlg 285.00, gbp 103.00
• intelligent image databases: towards advanced image retrieval: by yihong gong. Kluwer academic publishers, boston, ma. (1998). 134 pages. $95.00, nlg 205.00, gbp 62.75

• LiDAR and Camera Detection Fusion in a Real-Time Industrial Multi-Sensor Collision Avoidance System

• Harmonic Extended State Observer Based Anti-Swing Attitude Control for Quadrotor with Slung Load

• Design of High-Security USB Flash Drives Based on Chaos Authentication

• eCMOS Compatible Bio-Realistic Implementation with Ag/HfO₂-Based Synaptic Nanoelectronics for Artificial Neuromorphic System

• A Performance Study of Massive MIMO Heterogeneous Networks with Ricean/Rayleigh Fading 

  Practical Energy Harvesting for Batteryless Ambient Backscatter Sensors
• association between dietary pattern and cardiometabolic risk in children and adolescents: a systematic review

• analysis and experiment of encoding errors for moems micro mirror spectrometer

• ms4 golimumab significantly improves productivity in patients with active ankylosing spondylitis: results from the phase 3 go-raise study

• microsolvation of uracil anion radical in aqueous solution: a qm/mm study

• dynamics: numerical explorations: (second, revised and enlarged edition). By helena e. Nusse and james a. Yorke. Springer, new york. (1998). 608 pages. $69.95 (diskette included)

• determinants of reverse knowledge transfer for emerging market multinationals: the role of complexity, autonomy and embeddedness

• a novel moems nir spectrometer
• work-based blended learning and technological scaffolding system to enhance communication skills for caregivers under local administrative organization, ministry of interior, thailand (part i)

• performance evaluation of the pwssim metric for hevc and h.264

• evaluating the role e-government on public administration reform: case of official city government websites in indonesia

• influence of the aluminum paste surface density on the electrical parameters of silicon solar cells

• protection against oxidative damage in human erythrocytes and preliminary photosafety assessment of punica granatum seed oil nanoemulsions entrapping polyphenol-rich ethyl acetate fraction

• knowledge capture in cmm inspection planning: barriers and challenges

• the electronic health record and its contribution to healthcare information systems interoperability

• the determinants of crowdfunding success: evidence from technology projects 

• Fuzzy Logic Controller Design for Intelligent Robots
• Towards Rehabilitation Robotics: Off-the-Shelf BCI Control of Anthropomorphic Robotic Arms
• A Distributed Tactile Sensor for Intuitive Human-Robot Interfacing
• Residency Training in Robotic General Surgery: A Survey of Program Directors
• Robotics in Lower-Limb Rehabilitation after Stroke

• Real-Time Ground Vehicle Detection in Aerial Infrared Imagery Based on Convolutional Neural Network
• Implementation of a Cost-Effective Didactic Prototype for the Acquisition of Biomedical Signals
• A Miniaturized Electromagnetic Bandgap Structure Using an Inductance-Enhanced Patch for Suppression of Parallel Plate Modes in Packages and PCBs
• SystemC/TLM Controller for Efficient NAND Flash Management in Electronic Musical Instruments
• A 6-Bit 0.13 μm SiGe BiCMOS Digital Step Attenuator with Low Phase Variation for K-Band Applications
• ql10 development and validation of the satisfaction with medication questionnaire (sat-q) in patients with chronic disease

• analysis of internal motion of single tryptophan in streptomyces subtilisin inhibitor from its picosecond time-resolved fluorescence

• specification and verification of the ieee 802.11 medium access control and an analysis of its applicability to real-time systems

• spectroscopic, structural, and functional characterization of the alternative low-spin state of horse heart cytochrome c

• epidemiological study of dysphonia in 4-12 year-old children

• admission control of vl in afdx under hrt constraints

• evaluation of pollutant gases emitted by ethanol and gasoline powered vehicles

• detection of gaseous pollutants by vng-powered vehicles

• a comparative study of the phenolic compounds and the in vitro antioxidant activity of different brazilian teas using multivariate statistical techniques

• acoustic vocal measures in women without voice complaints and with normal larynxes

• users’ needs and business models for a sustainable mobility information network in the alpine space

• oral manifestations resulting from chemotherapy in children with acute lymphoblastic leukemia

• does breastfeeding influence the risk of developing diabetes mellitus in children? A review of current evidence

• extracting sparse factors from multivariate integral polynomials

• i know what you are doing: a neurophysiological study
• Concept Design and Analysis of a Novel Steamer-Filling Robot
• A Survey of Bioinspired Jumping Robot: Takeoff, Air Posture Adjustment, and Landing Buffer
• The Experience of the Robot Programming Network Initiative
• Feasibility of Muscle Synergy Outcomes in Clinics, Robotics, and Sports: A Systematic Review
• Modular Self-Reconfigurable Robotic Systems: A Survey on Hardware Architectures

•  Monocular Vision SLAM-Based UAV Autonomous Landing in Emergencies and Unknown Environments
• The Platform Development of a Real-Time Momentum Data Collection System for Livestock in Wide Grazing Land
• Adhesion Control Strategy Based on the Wheel-Rail Adhesion State Observation for High-Speed Trains
• Methane Gas Density Monitoring and Predicting Based on RFID Sensor Tag and CNN Algorithm
• A Hierarchical Vision-Based UAV Localization for an Open Landing
• Impact of Changes in Service Sector in Shaping Business and Society Telecommunication Industry
• Telecommunication service choice and use among migrants: The case of German-Turkish consumers
• A Key Perspective on Specialized Lexis: Keywords in Telecommunication Engineering for CLIL

•  Bosnia and Herzegovina Telecommunication Sector Outlook

• Impact analysis of wind farms on telecommunication services
• Comparing Drools and Ontology Reasoning Approaches for Automated Monitoring in Telecommunication Processes
• Factors Contributing to Customer Loyalty Towards Telecommunication Service Provider
• A high abstraction level approach for detecting feature interactions between telecommunication services
• Design and FPGA Synthesis of Three Stage Telecommunication Switching in HDL Environment
• Effect of Management Factor on Employee Job Satisfaction: An Application in Telecommunication Sector
• Investigating the Impact of Website Quality on Consumers’ Satisfaction in Jordanian Telecommunication Sector
• The Expected Impact of IFRS Adoption on Saudi Arabia based on Lessons from other Countries: A Focus on the Telecommunication Business
• Finite Element Analysis of Telecommunication Mini Mast Structure
• Modeling and performance optimization of automated antenna alignment for telecommunication transceivers
• Public Administration Owned Regional Telecommunication Networks as Strategic Asset During 2012 Earthquake in Emilia-Romagna 

• A Lower Limb Rehabilitation Robot in Sitting Position with a Review of Training Activities
• A Review of Robotics in Neurorehabilitation: Towards an Automated Process for Upper Limb
• A Wearable Robotic Device Based on Twisted String Actuation for Rehabilitation and Assistive Applications
• Advanced Interval Type-2 Fuzzy Sliding Mode Control for Robot Manipulator
• Systematic Review of Appropriate Robotic Intervention for Gait Function in Subacute Stroke Patients

•  Multi-Scroll Chaotic Attractors in SC-CNN via Hyperbolic Tangent Function
• Blockchain-Oriented Coalition Formation by CPS Resources: Ontological Approach and Case Study
• PrECast: An Efficient Crypto-Free Solution for Broadcast-Based Attacks in IPv4 Networks
• Two-Dimensional (2D) Slices Encryption-Based Security Solution for Three-Dimensional (3D) Printing Industry
• A Novel Supercapacitor/Lithium-Ion Hybrid Energy System with a Fuzzy Logic-Controlled Fast Charging and Intelligent Energy Management System 
• The Technology, Technical Skill, and R&D Capability in Increasing Profitability on Indonesia Telecommunication Services Companies
• Chain model of knowledge base of telecommunication systems dielectric structures
• The influence of the perceptions of department heads on the integration of sustainable content in computer and telecommunication engineering schools
• Renewable Micro Hybrid System of Solar Panel and Wind Turbine for Telecommunication Equipment in Remote Areas in Sudan
• Study on Optical Fiber Insertion in Underground Telecommunication Networks Using Hydraulic Similarity
• Reliability evaluation of large telecommunication networks
• Bidirected and unidirected capacity installation in telecommunication networks
• Towards a Just City in Information Era: Understanding the Inclusiveness of Community Network Induced by Telecommunication Technology at the Local Level (Case Study: Cihapit and Cipaganti Neighborhoods, Bandung City, Indonesia)
• Approximation algorithms and relaxations for a service provision problem on a telecommunication network
• Analysis of Customer Fulfilment with Process Mining: A Case Study in a Telecommunication Company
• Dynamic simulation of a multi-generation system, for electric and cooling energy provision, employing a SOFC cogenerator and an adsorption chiller
• Quarter-Sphere Support Vector Machine for Fraud Detection in Mobile Telecommunication Networks
• Measuring the Technical Efficiency of Telecommunication Sector within Global Crisis: Comparison of G8 Countries and Turkey
• Impact of Information and Telecommunication Technologies Development on Labour Productivity
• On the impact of customer balking, impatience and retrials in telecommunication systems 

• A Feasibility Study of SSVEP-Based Passive Training on an Ankle Rehabilitation Robot
• Compact Surface Plasmon Resonance Sensor for Underwater Chemical Sensing Robot
• An Ultrasound Imaging-Guided Robotic HIFU Ablation Experimental System and Accuracy Evaluations
• Wireless Brain-Robot Interface: User Perception and Performance Assessment of Spinal Cord Injury Patients
• Keyframes Global Map Establishing Method for Robot Localization through Content-Based Image Matching

•  Implementation of a Single-Phase SST for the Interface between a 13.2 kV MVAC Network and a 750 V Bipolar DC Distribution
• Bagged Decision Trees Based Scheme of Microgrid Protection Using Windowed Fast Fourier and Wavelet Transforms
• Evaluation of LDMOS Figure of Merit Using Device Simulation
• Radar Waveform Recognition Based on Time-Frequency Analysis and Artificial Bee Colony-Support Vector Machine
• Wireless Power Transfer System for Rotary Parts Telemetry of Gas Turbine Engine
• A formal framework for the decentralised diagnosis of large scale discrete event systems and its application to telecommunication networks
• Discrete-time cost analysis for a telecommunication billing application with rejuvenation
• Data on customer perceptions on the role of celebrity endorsement on brand preference
• A Maude specification of an object-oriented model for telecommunication networks
• Firms' knowledge profiles: Mapping patent data with unsupervised learning
• Different Criteria of Dynamic Routing
• Research of a Network Congestion Prototype in Cloud Environment
• Contact between parents and adult children: The role of time constraints, commuting and automobility
• The Project of Intellectual Multimodal Transport System
• Generation of self-similar processes for simulation studies of telecommunication networks
• Logic programming for real-time control of telecommunication switching systems
• Public or Private Telecoms? The Effects of Ownership on Greek Telecommunications Market the Effects of Ownership on Greek Telecommunications Market
• Development Strategies of Telecommunication Companies after the Markets’ Liberalisation. A Case Study: Telecom Italia
• A Maude specification of an object-oriented database model for telecommunication networks
• Mobile communication through insulating windows: a new type of low emissivity coating
• Kinematics, Dynamics, and Optimal Control of Pneumatic Hexapod Robot
• Constrained Quadratic Programming and Neurodynamics-Based Solver for Energy Optimization of Biped Walking Robots
• Hierarchical Shared Control of Cane-Type Walking-Aid Robot
• Robust Feedback Control Design of Underactuated Robotic Hands with Selectively Lockable Switches for Amputees
• Real-Time Control System for Improved Precision and Throughput in an Ultrafast Carbon Fiber Placement Robot Using a SoC FPGA Extended Processing Platform 

• Impact of Relationship Marketing Tactics (RMT's) & Relationship Quality on Customer Loyalty: A Study within the Malaysian MobileTelecommunication Industry
• A Fuzzy Inference System for Supporting the Retention Strategies of Human Capital
• Threshold-based generic scheme for encrypted and tunneled Voice Flows Detection over IP Networks
• Knowledge Sharing Strategy as a Key Element of the H2020 Programme: Enhancing Excellence and Innovation Capacity in Sustainable Transport Interchanges (Alliance) Project
• Bit Error Rate Analysis Using QAM Modulation for Satellite Communication Link
• Machining Performances of Electrical Discharge Machining Combined with Abrasive Jet Machining
• Electrical Discharge Machining studies on Monel- Super Alloy
• Effects of Different Electrode Materials on High-speed Electrical Discharge Machining of W9Mo3Cr4V
• Air-Gap Heat Transfer in Rotating Electrical Machines: A Parametric Study
• Formation of the Workpiece Shape and Surface Finish During Electrical Discharge Machining
• New Trends in Energy Efficient Electrical Machines
• Ultrasonic Assisted Electrical Discharge Machining for High Aspect Ratio Blind Holes
• A Review on: Wire cut electrical discharge machining process for metal matrix composite
• ED-machinable Ceramics with Oxide Matrix: Influence of Particle Size and Volume Fraction of the Electrical Conductive Phase on the Mechanical and Electrical Properties and the EDM Characteristics
• The Effects of Graphite Powder on Tool Wear in Micro Electrical Discharge Machining 

• Vision System of Mobile Robot Combining Binocular and Depth Cameras
• Trajectory Optimization of Spray Painting Robot for Complex Curved Surface Based on Exponential Mean Bézier Metho
  
• Design and Voluntary Motion Intention Estimation of a Novel Wearable Full-Body Flexible Exoskeleton Robot
• Tracking Control for Mobile Robots Considering the Dynamics of All Their Subsystems: Experimental Implementation
• In Situ SEM Torsion Test of Metallic Glass Microwires Based on Micro Robotic Manipulation 
• Precision and Throughput in an Ultrafast Carbon Fiber Placement Robot Using a SoC FPGA Extended Processing Platform 

• Pulse Generator for Obtaining Surfaces of Small Dimensions by Electrical Discharge Machining
• Electrical Discharge Machining with the Application of the Conductive Laser Channels
• Investigation on the Variability of Existing Models for Simulation of Local Temperature Field during a Single Discharge for Electrical DischargeMachining (EDM)
• Performance Evaluation and Optimization Algorithm for Electrical Discharge Machining Process Using a Noble Non-Dimensional Mathematical Model
• High Efficient Electrical Discharge Machining by Servo Voltage Adaptive Control
• Prediction of Material Removal Rate in Die-sinking Electrical Discharge Machining
• Ascertaining Life Cycle Inventory Data for Electrical Discharge Machining
• Machined Surface Quality in Nano Aluminum Mixed Electrical Discharge Machining
• Study on the Effect of External Hydrostatic Pressure on Electrical Discharge Machining
• An Experimental Investigation of Machinability of Inconel 718 in Electrical Discharge Machining
• Simulation Analysis of the Crater Size for Single-pulse Dry Electrical Discharge Machining
• Electrical Discharge Machining of PCD in Ultrapure Water
• Comparison of Electrical Discharge Machining Speed of Tool Electrodes with Different Thermo-physical Properties Related to Ease of Boiling
• Surface Integrity and Fatigue Performance of Inconel 718 in Wire Electrical Discharge Machining
• Intensive Study on the Electrostatic Field Induced Electrolyte Jet Micro Electrical Discharge Machining 

• Reviewing Clinical Effectiveness of Active Training Strategies of Platform-Based Ankle Rehabilitation Robots
• New Design of a Soft Robotics Wearable Elbow Exoskeleton Based on Shape Memory Alloy Wire Actuators
• A Review of Outcomes and Technique for the Robotic-Assisted Laparoscopic Retroperitoneal Lymph Node Dissection for Testicular Cancer
• Indoor Dead Reckoning Localization Using Ultrasonic Anemometer with IMU
• Motor Imagery-Based Brain-Computer Interface Coupled to a Robotic Hand Orthosis Aimed for Neurorehabilitation of Stroke Patients

• Stable and Fast Electrical Discharge Machining Titanium Alloy with MIMO Adaptive Control System
• Solution of Linear Time Periodic Dynamical System with Appliction to Electrical Machines Using Chebyshev Polynomial Approch
• Fabrication of PCD Mechanical Planarization Tools by using μ-Wire Electrical Discharge Machining
• Surface Integrity of Tool Steels Multi-cut by Wire Electrical Discharge Machining
• Characterising Energy Efficiency of Electrical Discharge Machining (EDM) Processes
• An experimental investigation of wire electrical discharge machining of hot-pressed boron carbide
• Hybrid Thermal Model of a Synchronous Reluctance Machine
• Numerical Modeling ofWire Electrical Discharge Machining of Super Alloy Inconel 718
• Observation of Material Removal from Discharge Spot in Electrical Discharge Machining
• Electrical Discharge Machining on Biodegradable AZ31 Magnesium Alloy Using Taguchi Method
• Inverse Simulation of Heat Source in Electrical Discharge Machining (EDM)
• Thermal-structural Analysis of Electrical Discharge Machining Process
• Reconfigurable machine tool: CNC machine for milling, grinding and polishing
• Conditions for Bending of Thin Metal Sheet by Thermal Strain in Electrical Discharge Machining
• Analyzing of Discharge Wave Oscillation Mechanism in Electrical Discharge Machining 

• Applied Mathematics to Mobile Robotics and Their ApplicationsAn Electronic Architecture for Multipurpose Artificial Noses
• An Automatic Assembling System for Sealing Rings Based on Machine VisionCharacterization of the Resistance and Force of a Carbon Nanotube/Metal Side Contact by Nanomanipulation
• Corrigendum to “Mobile Robot Simultaneous Localization and Mapping Based on a Monocular Camera” 

• Degradation of titanium 6Al–4V fatigue strength due to electrical discharge machining
• Influence of Oxidizing Gas on the Stability of Dry Electrical Discharge Machining Process
• A Jump Motion Velocity Planning Algorithm with Continuous Jerk for Electrical Discharge Machining
• Influence of the Anode Material on the Breakdown Behavior in Dry Electrical Discharge Machining
• Development of a New Generator for Die Sinking Electrical Discharge Machining
• Electrical Discharge Machining of Ceramic/Carbon Nanostructure Composites
• Electrical Integrity and its Protection for Reliable Operation of Superconducting Machines
• Effect of electrode material on electrical discharge machining of tool steel surface
• Condition Monitoring in Concurrent Micro-hole Electrical Discharge Machining with Electrode Feeding Devices Employing AZARASHI (Seal) Mechanism
• Electrical Discharge Machining of René 108 DS Nickel Superalloy for Aerospace Turbine Blades
• Machine Tool and Technology for Manufacturing of Micro-structures by Micro Dry Electrical Discharge Milling
• Influence of Open-circuit Voltage on Micro Electrical Discharge Machining of Ni-Al2O3 Functionally Graded Materials
• Mathematical modeling of aerosol emission from die sinking electrical discharge machining process
• Effects of Polarization on Machining Accuracy in Pulse Electrochemical Machining
• Modeling and simulationof electrical discharge machining 

• Optimal set-up and surface finish characteristics in electrical discharge machining on Ti-5Al-2.5Sn using graphite
• Study on Electrical Discharge and Ultrasonic Assisted Mechanical Combined Machining of Polycrystalline Diamond
• Attempts at Synchronized Observation of Processing Phenomenon and Discharge Waveform in Electrical Discharge Machining of Transparency Insulators
• Effect of Electrical Discharge Machining Parameters on Microwave Heat Treated Aluminium-boron Carbide-graphite Composites
• Optimization of Electrical Discharge Turning Process using Taguchi-Grey Relational Approach
• Machining of Small Curved Hole Using Electrochemical Machining Process
• Simulation-assisted Investigation of the Electric Power Consumption of Milling Processes and Machine Tools
• Research on the Real-time Wear of Wire Electrode During the Electrical Discharge Machining (EDM) of Precision Micro Hole
• Neural Network Modeling and Analysis for Surface Characteristics in Electrical Discharge Machining
• Wire electro discharge machining of metal matrix composites: A review
• Further Study of Carbon Fibres Electrodes in Micro Electrical Discharge Machining
• Optimization of material removal rate during electrical discharge machining of cryo-treated NiTi alloys using Taguchi’s method
• Electrical Discharge Machining for Complex Cavity with a Porous Electrode
• Effects of Composition on Mechanical and ED-machining Characteristics of Zirconia toughened Alumina – Titanium Carbide (ZTA-TiC) Composite Ceramics
• Study of the parameters in electrical discharge machining through response surface methodology approach 

• Innovative Methods for Automated Assembly and Fixation of Permanent Magnets in Electrical Machines
• Pulse Efficiency and Gap Status of Rotary Ultrasonic Assisted Electrical Discharge Machining and EDM Milling
• Reducing Edge Chipping of Micro-holes with Electrophoresis-assisted Micro-ultrasonic Machining
• Influence of Workpiece Circumferential Speed in Wire Electrical Discharge Machining
• Influence of Tool Size on Machining Characteristics of Micro-EDM
• Modelling and analysis of dual stator-winding induction machine using complex vector approach
• Friction Characteristics of Textured Surface Created by Electrical Discharge Machining Under Lubrication
• Experimental Investigation of EDM Parameters for ZrB2-SiC Ceramics Machining
• Study of Machining Characteristics of Micro EDM in Nitrogen Plasma Jet
• Development of Advanced Abrasive Electrical Discharge Grinding (AEDG) System for Machining Difficult-to-cut Materials
• Control of the research stand for electrochemical machining
• Electrical Discharge Machining (EDM): Practices in Malaysian Industries and Possible Change towards Green Manufacturing
• Improving Machining Efficiency Methods of Micro EDM in Cold Plasma Jet
• Mathematical Modeling for Radial Overcut on Electrical Discharge Machining of Incoloy 800 by Response Surface Methodology
• Air-gap Flow and Thermal Analysis of Rotating Machines using CFD 

• A Contribution on the Modelling of Wire Electrical Discharge Machining of a γ-TiAl Alloy
• Study of Influence of Process Parameters in Electric Discharge Machining of Aluminum – Red Mud Metal Matrix Composite
• Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method
• An Empirical Model for Controlling Characteristics of Micro Channel Machined Using Abrasive Assisted Electrochemical Jet Machining
• TEM study on the electrical discharge machined surface of single-crystal silicon
• Effect of Grain Sizes of Stainless Steel on the Erosion Feature of Single Electrical Discharge Pulse
• Impact Analysis of Electrode Material on Electrical Discharge Grinding Polycrystalline Diamond Cutting Tools
• Numerical Analysis of Flushing-Induced Thermal Cooling Including Debris Transport in Electrical Discharge Machining (EDM)
• Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode
• The Effect of Wire Electrical Discharge Machining on the Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo Aerospace Alloy
• Teaching of Simulation an Adjustable Speed Drive of Induction Motor Using MATLAB/Simulink in Advanced Electrical Machine Laboratory
• Parametric Optimization During Wire Electrical Discharge Machining using Response Surface Methodology
• The Effect of Unilateral Side Flushing on the Integrity of the Workpiece under Different Machining Conditions
• Process on Single Channel Scanning Milling of Micro-electrical Discharge Based on Integration Mechanism
• A decision guidance framework for non-traditional machining processes selection 

• On the Effects of Wire Electrode and Ceramic Volume Fraction in Wire Electrical Discharge Machining of Ceramic Particulate Reinforced Aluminium Matrix Composites
• Research on Electrical Discharge Grinding Technics and Tool's Life of Polycrystalline Cubic Boron Nitride Cutting Tool
• Relationship between Occurrence of Material Removal and Bubble Expansion in Electrical Discharge Machining
• Wire EDM of ZTA-NbC Dispersion Ceramics – The Influence of ED Machining on Mechanical Properties
• High-efficient Dry Hybrid Machining of EDM and Arc Machining
• Optimization of Machining Parameters in Electrical Discharge Machining (EDM) of 304 Stainless Steel
• Optimizing Machining Parameters of Compound Machining of Inconel718
• An Innovative Approach for Generation of Aluminium Nanoparticles Using Micro Electrical Discharge Machining
• Potentials of the Phase Field Approach for Modeling Modifications in Material Microstructure during Electrical Discharge Machining
• Machinability of ZTA-TiC Ceramics by Electrical Discharge Drilling
• The Discharge Channel Formation and the Mechanism of Material Removal During Electrical Discharge Micromachining by Nanosecond Pulses
• Towards a durability test for washing-machines
• A Tube Electrode High-speed Electrochemical Discharge Drilling Method without Recast Layer
• The Effect of Multidirectional Vibration On Electrochemical Machining
• Selection of parameters for advanced machining processes using firefly algorithm

• Machine Allocation via Pattern Recognition in Harmonic Waves of Manufacturing Plants
• Fast and Stable Electrical Discharge Machining (EDM) by Two-step-ahead Predicted Control
• Experimental Investigation of Energy Saving Opportunities in Tube Bending Machines
• Automated Dressing of Graphite Electrodes for Electrical Discharge Machining (EDM) of Seal Slots in Turbine Components
• Investigation on the Effect of Process Parameters in Micro Electrical Discharge Machining
• Development and application of measurement techniques for evaluating localised magnetic properties in electrical steel
• Effect of Boron Carbide Powder Mixed into Dielectric Fluid on Electrical Discharge Machining of Titanium Alloy
• Analysis of Reactions Determining Current Efficiency in Electrochemical Machining
• Assessment on Improvement of Early Detection Systems in Electrical Rooms of High-Tech Facilities
• Smart Wire EDM Machine
• Composites in Production Machines
• Machining of a film-cooling hole in a single-crystal superalloy by high-speed electrochemical discharge drilling
• Comparison the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation
• Localization Transformation of Five Coordinate Milling Machine
• Progressing towards DC electrical systems for marine vessels
• Selection of parameters for advanced machining processes using firefly algorithm 

• Multi-objective parametric optimization of nano powder mixed electrical discharge machining of AlSiCp using response surface methodology and particle swarm optimization
• Effect of Mixing Gas for Machining Surface Property of Micro-bubble Entrained EDM
• Investigation on Copper Nanofluid Obtained through Micro Electrical Discharge Machining for Dispersion Stability and Thermal Conductivity
• Integral Shrouded Blisk EDM Pre-rough Machining by Using Simplified Electrode
• Investigation of the Material Removal Process in Counter-rotating Electrochemical Machining
• Cyber-physical Machine Tool – The Era of Machine Tool 4.0
• Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy
• A Comparative Study on White Layer Properties by Laser Cutting vs. Electrical Discharge Machining of Nitinol Shape Memory Alloy
• Study on Quality Improvement of Machine Tools
• Nonlinear dynamic analysis of an electrical machine rotor–bearing system by the optimal homotopy perturbation method
• Experimental Study of Electrical Discharge Machine (die sinking) on Stainless Steel 316L Using Design of Experiment
• Break-out Detection for High-speed Small Hole Drilling EDM Based on Machine Learning
• Design automation of control panels for automated modular construction machines
• Machining Mechanisms and Characteristics of Moving Electric Arcs in High-speed EDM Milling
• Signal processing methods in fault detection in manufacturing systems 

• Design and Development of a Speech therapy Module Using Signal Processing Techniques
• Cyclostationarity Based Sonar Signal Processing
• Research Progress of The Algebraic and Geometric Signal Processing
• Signal processing by the endosomal system
• Advances in High-speed and Adaptive Microwave Photonic Signal Processing
• Antenna Array Signal Direction of Arrival Estimation on Digital Signal Processor (DSP)
• Tool Condition Monitoring of Single-point Dressing Operation by Digital Signal Processing of AE and AI
• Signal processing methods to improve the Signal-to-noise ratio (SNR) in ultrasonic non-destructive testing of wind turbine blade
• Multisensor Time–Frequency Signal Processing MATLAB package: An analysis tool for multichannel non-stationary data
• Advances in biomedical signal and image processing – A systematic review
• Bicoid Signal Extraction with a Selection of Parametric and Nonparametric Signal Processing Techniques
• Multi Sensor Signal Processing for Catastrophic Tool Failure Detection in Turning
• Designer cell signal processing circuits for biotechnology
• Perception in noise with the Digisonic SP cochlear implant: Clinical trial of Saphyr processor's upgraded signal processing
• Advances in Signal Acquisition and Signal Processing of Coriolis Flow Meters

• Do you have the nerves to regenerate? The importance of neural signalling in the regeneration process
• Signal Processing using FPGA Structures
• Multiscale Analysing Methods in Electrocardiogram Signal Processing and Interpretation
• Analysis and optimization of electrochemiluminescence periodic signal processing based on singular value decomposition
• Determination of the Impedance of Lithium-ion Batteries Using Methods of Digital Signal Processing
• Possibilistic signal processing: How to handle noise?
• An effective method of signal processing in problems of low-frequency defectoscopy.
• MUPET—Mouse Ultrasonic Profile ExTraction: A Signal Processing Tool for Rapid and Unsupervised Analysis of Ultrasonic Vocalizations
• Advanced IT Methods of Signal Processing and Decision Making for Zero Defect Manufacturing in Machining
• Impact Damage Characterization in Composites Using Signal Processing Techniques
• Teaching Digital Signal Processing
• Signal peptidase I processed secretory signal sequences: Selection for and against specific amino acids at the second position of mature protein
• A Signal Processing Approach for Cyber Data Classification with Deep Neural Networks
• Split-Spectrum Signal Processing for Reduction of the Effect of Dispersive Wave Modes in Long-range Ultrasonic Testing
• A software companion for compressively sensed time–frequency processing of sparse nonstationary signals

• Experimental investigation into vibro-acoustic emission signal processing techniques to quantify leak flow rate in plastic water distribution pipes
• Multiscale dynamic visualization of signal transduction processes with detailing of target-genes activation in three-dimensional genome structure
• Symbolic computation and signal processing
• Application of adaptive Savitzky–Golay filter for EEG signal processing
• Generalized wavelets design using Kernel methods. Application to signal processing
• Processing of Signals Produced by Strain Gauges in Testing Measurements of the Bridges
• Musical Notes Identification using Digital Signal Processing
• Pulse-height loss in the signal readout circuit of compound semiconductor detectors
• Wire EDM Monitoring for Zero-defect Manufacturing based on Advanced Sensor Signal Processing
• Aeroacoustics -Noise Prediction by Using “LES” for Signal Processing
• Drift Correction Modulation scheme for digital signal processing
• Mathematical modelling and analysis of the brassinosteroid and gibberellin signalling pathways and their interactions
• The Interdependence of Membrane Shape and Cellular Signal Processing
• Advanced Signal Processing Algorithms in Structural Integrity Monitoring
• Defect Detection in Friction Stir Welding Process Using Signal Information and Fractal TheoryDefect Detection in Friction Stir Welding Process Using Signal Information and Fractal Theory

• The Design of Experimental Teaching System for Digital Signal Processing Based on GUI
• Improvement of the GERDA Ge Detectors Energy Resolution by an Optimized Digital Signal Processing
• Influence of signal processing strategy in auditory abilities
• A Framework for High Performance Embedded Signal Processing and Classification of Psychophysiological Data
• Regulation of TGFβ and related signals by precursor processing
• Effects of signal processing on the measurement of maximum sound pressure levels
• Analysis of the Influence of Disturbance of Vacuum Stream Signal on Steering Process of the Spark-ignition Combustion Engine
• On the selectivity, specificity and signalling potential of the long-distance movement of messenger RNA
• Parallel signal processing with S-Net
• Signal Processing in the Axon Initial Segment
• Signal Processing Approach for Music Synthesis Using Bird's Sounds
• Frequency Measurement Methods by Signal Processing Techniques
• Signal processing in portable ion mobility spectroscopy
• Model Based Design Environment for Data-driven Embedded Signal Processing Systems
• Advanced Sensor Signal Feature Extraction and Pattern Recognition for Wire EDM Process Monitoring
• Defect Detection in Friction Stir Welding Process Using Signal Information and Fractal Theory

• Analysis of the Influence of Disturbance of Vacuum Stream Signal on Steering Process of the Spark-ignition Combustion Engine
• On the selectivity, specificity and signalling potential of the long-distance movement of messenger RNA
• Parallel signal processing with S-Net
• Signal Processing in the Axon Initial Segment
• Signal Processing Approach for Music Synthesis Using Bird's Sounds
• Frequency Measurement Methods by Signal Processing Techniques
• Signal processing in portable ion mobility spectroscopy
• Model Based Design Environment for Data-driven Embedded Signal Processing Systems
• Advanced Sensor Signal Feature Extraction and Pattern Recognition for Wire EDM Process Monitoring
• Cellular Signal Processing: Out of One, Many
• Formalization of Signaling System by Process Calculus
• Tunable Signal Processing through a Kinase Control Cycle: the IKK Signaling Node
• Signalling for B cell survival
• Subcellular Imaging of Voltage and Calcium Signals Reveals Neural Processing In Vivo
• A downward signal processing method for rotary steerable drilling system based on signal similarity
• β Cell GLP-1R Signaling Alters α Cell Proglucagon Processing after Vertical Sleeve Gastrectomy in Mice
• Current Differencing Transresistance Amplifier (CDTRA) and its Application for Analog Signal Processing
• The regulation of JAKs in cytokine signaling and its breakdown in disease
• Vascular wall regulator of G-protein signalling-1 (RGS-1) is required for angiotensin II–mediated blood pressure control
• An Approach for Real-time Levee Health Monitoring Using Signal Processing Methods
• Measure of regularity in discrete time signals
• Thioredoxin-mediated redox signalling in plant immunity
• Mathematical modeling of signal transfer process into optical system of a linear displacement encoder

• fibroblast growth factor interactions in the developing lung

• Tailoring the Edge Sites of 2D Pd Nanostructures with Different Fractal Dimensions for Enhanced Electrocatalytic Performance
• Current Status of Outdoor Lifetime Testing of Organic Photovoltaics
• Stretchable Multiresponsive Hydrogel with Actuatable, Shape Memory, and Self‐Healing Properties
• Cobalt Nanoparticles/Black Phosphorus Nanosheets: An Efficient Catalyst for Electrochemical Oxygen Evolution
• Real‐Time Cellular Cytochrome C Monitoring through an Optical Microfiber: Enabled by a Silver‐Decorated Graphene Nanointerface 

•   Design and Implementation of SORIGA-optimized Powers-of-two FIR Filter on FPGA
•    Eddy Current Sensor Modeling for the Nondestructive Evaluation of Stress Intensity Factor
• Optimal Channel Selection for Robust EEG Single-trial Analysis
• Three-dimensional Reconstruction from Projections based on Incidence Matrices of Patterns
• Application of RPM Logging for Reservoir Dynamic Monitoring at M Oilfield of Offshore
• Copy-move Image Forgery Detection Using an Efficient and Robust Method Combining Un-decimated Wavelet Transform and Scale Invariant Feature Transform
• Efficient Current Bleeding Mixer for WiMax Applications
•   Application of Nonlinear H∞ Filtering Algorithm for Initial Alignment of the Missile-borne SINS
•   Development of Innovative Tool Using Taguchi-methods
• On Qualitative Properties of Incompressible Cluster Flow on the Ring Network
• Self-Regulation of Information Complexes DNA in Hierarchy Networks of Shannon Entropy inside Living Cells
• New Method to Use Idle Personal Computers for Solving Coherent Tasks
• Error Threshold for Individual Faulty Gates Using Probabilistic Transfer Matrix (PTM)
• Simple Model Based Dead Time Compensation Using Fast Current Measurement
• Bias Compensation of Gyroscopes in Mobiles with Optical Flow

• Rapid Response Fluorescence Probe Enabled In Vivo Diagnosis and Assessing Treatment Response of Hypochlorous Acid‐Mediated Rheumatoid Arthritis

• Oral Nonviral Gene Delivery for Chronic Protein Replacement Therapy

• The Dual Functional Reflecting Iris of the Zebrafish

• Single‐Step Selective Laser Writing of Flexible Photodetectors for Wearable Optoelectronics

• 3D Nanofabrication of High‐Resolution Multilayer Fresnel Zone Plates
• Kinematics, Dynamics, and Optimal Control of Pneumatic Hexapod Robot
• Constrained Quadratic Programming and Neurodynamics-Based Solver for Energy Optimization of Biped Walking Robots
• Hierarchical Shared Control of Cane-Type Walking-Aid Robot
• Robust Feedback Control Design of Underactuated Robotic Hands with Selectively Lockable Switches for Amputees
• Real-Time Control System for Improved Precision and Throughput in an Ultrafast Carbon Fiber Placement Robot Using a SoC FPGA Extended Processing Platform 

Influencing factors on the interface microhardness of lightweight aggregate concrete consisting of glazed hollow bead

• Effect of organo-modified montmorillonite on poly(butylene succinate)/poly(butylene adipate-co-terephthalate) nanocomposites
• Sims with time-of-flight option
• Scrlh-tl based sequential rotation feed network for broadband circularly polarized antenna array
• The impact of domain-specific languages for assembling web applications
• The design and implementation of a solar tracking generating power system
• Self-forming nanoscale devices
• A New Texture Analysis Approach for Iris Recognition
• Universal Remote Control Systems for Domestic Devices Using Radio Frequency Waves
• The Hierarchical Network Topology Management System based on Managed Object and View Mechanism
•   Comparison of SIFT and SURF Methods for Use on Hand Gesture Recognition based on Depth Map
• Classification of Wild Animals based on SVM and Local Descriptors
• A Novel Imaging Approach of Web Documents based on Semantic Inclusion of Textual and Non – Textual Information
• Noise Variance Estimation for Spectrum Sensing in Cognitive Radio Networks
•    Effect of Geometry Parameters on Low-speed Cavity Flow by Wind Tunnel Experiment

• 11% Organic Photovoltaic Devices Based on PTB7‐Th: PC₇₁BM Photoactive Layers and Irradiation‐Assisted ZnO Electron Transport Layers
• Mitochondria‐Targeted Artificial “Nano‐RBCs” for Amplified Synergistic Cancer Phototherapy by a Single NIR Irradiation
• A Metal Chelator as a Plasmonic Signal‐Generation Superregulator for Ultrasensitive Colorimetric Bioassays of Disease Biomarkers
• HPV Oncogene Manipulation Using Nonvirally Delivered CRISPR/Cas9 or Natronobacterium gregoryi Argonaute
• Networked Cages for Enhanced CO₂ Capture and Sensing
• Vision System of Mobile Robot Combining Binocular and Depth Cameras
• Trajectory Optimization of Spray Painting Robot for Complex Curved Surface Based on Exponential Mean Bézier Method
• Design and Voluntary Motion Intention Estimation of a Novel Wearable Full-Body Flexible Exoskeleton Robot
• Tracking Control for Mobile Robots Considering the Dynamics of All Their Subsystems: Experimental Implementation
• In Situ SEM Torsion Test of Metallic Glass Microwires Based on Micro Robotic Manipulation 

• Contributions to the finite element modeling of linear ultrasonic motors
• Nanographene-based saturable absorbers for ultrafast fiber lasers
• Facilities management service delivery in public and private high rise residential buildings in nigeria: a case study of eko court complex and niger towers
• Comments and remarks over classic linear loop-gain method for oscillator design and analysis. New proposed method based on ndf/rrt
• Analytical and experimental study of residual stresses in cfrp
• Fixed points in discrete models for regulatory genetic networks
• Rationalization of foundry processes on the basis of simulation experiment
• Detecting single-molecule absorption
• An experimental study on flexural strength enhancement of concrete by means of small steel fibers
• Analysis of high superconducting rectangular microstrip patches over ground planes with rectangular apertures in substrates containing anisotropic materials
• Tribological behavior of si3n4/ti3sic2 contacts lubricated by lithium-based ionic liquids
• Overview of parallel platforms for common high performance computing
• Dynamic resolution in gpu-accelerated volume rendering to autostereoscopic multiview lenticular displays
• A new approach for the analysis of functionally graded beams
• Polarization dependence of surface enhanced raman scattering on a single dielectric nanowire

• Evaluation of recycled concrete by means of non destructive tests
• Modelling radiation exposure in homes from siporex blocks by using exhalation rates of radon
• Implementation of order-wire functionality in iritel ng-sdh devices
• Experimental investigation of the properties of electrospun nanofibers for potential medical application
• Experimental analysis of crack evolution in concrete by the acoustic emission technique
• Approaches and challenges of engineering implantable microelectromechanical systems (mems) drug delivery systems for in vitro and in vivo applications
• A robust iris identification system based on wavelet packet decomposition and local comparisons of the extracted signatures
• Effect of flexural crack on plain concrete beam failure mechanism a numerical simulation
• Transient response of thin wire above a layered half-space using tdie/fdtd hybrid method
• Directed self-assembly of block copolymer for bit patterned media with areal density of 1.5 teradot/inch2 and beyond
• Novel cross-type network for wide-tuning-range reconfigurable multiband antennas
• Simulation of zvs converter and analysis of its switching loss based on pspice
• Recent progress in piezoelectric conversion and energy harvesting using nonlinear electronic interfaces and issues in small scale implementation
• Effect of zinc phosphate chemical conversion coating on corrosion behaviour of mild steel in alkaline medium: protection of rebars in reinforced concrete
• What's science ever done for us? What the simpsons can teach us about physics, robots, life, and the universe
• Applied Mathematics to Mobile Robotics and Their Applications
• An Electronic Architecture for Multipurpose Artificial Noses
• An Automatic Assembling System for Sealing Rings Based on Machine Vision
• Characterization of the Resistance and Force of a Carbon Nanotube/Metal Side Contact by Nanomanipulation
• Corrigendum to “Mobile Robot Simultaneous Localization and Mapping Based on a Monocular Camera” 

• Room Temperature Uniaxial Magnetic Anisotropy Induced By Fe‐Islands in the InSe Semiconductor Van Der Waals Crystal
• 3D CNTs/Graphene‐S‐Al₃Ni₂ Cathodes for High‐Sulfur‐Loading and Long‐Life Lithium–Sulfur Batteries
• NIR‐Activated Polydopamine‐Coated Carrier‐Free “Nanobomb” for In Situ On‐Demand Drug Release
• Engineering Whole Mammalian Cells for Target‐Cell‐Specific Invasion/Fusion
• Recent Advance in Solution‐Processed Organic Interlayers for High‐Performance Planar Perovskite Solar Cells

• Evolution and quantification of the main sensitisers in commercial portland cements
• Thermal characterization of commercially pure titanium for dental applications
• A comparative study of applying mason’s rule in the case of flow-graphs and bond-graphs
• Cell-free protein synthesis from a small device
• An easy-to-fabricate low-temperature tio2 electron collection layer for high efficiency planar heterojunction perovskite solar cells
• Modulation polarimetry of full internal reflection, broken by diamond-like films
• Stretchable and foldable electronic displays
• Variance based ofdm frame synchronization
• Microspheres for the growth of silicon nanowires via vapor-liquid-solid mechanism
• Automated equipment for determining the magnetic susceptibility of steels and alloys
• Biomimetic coating on porous alumina for tissue engineering: characterisation by cell culture and confocal microscopy
• Quantum dots and nanoparticles in light emitting diodes, displays, and optoelectronic devices
• Analysis of arbitrary reflector antennas applying the geometrical theory of diffraction together with the master points technique
• Constructional similarity in process of ordered construction families creating
• Plasmonic properties of vertically aligned nanowire arrays

• Advanced Hierarchical Vesicular Carbon Co‐Doped with S, P, N for High‐Rate Sodium Storage
• An Ultrahigh Capacity Graphite/Li₂S Battery with Holey‐Li₂S Nanoarchitectures
• Bifunctional Nitrogen and Cobalt Codoped Hollow Carbon for Electrochemical Syngas Production
• Atomically Thin 2D Multinary Nanosheets for Energy‐Related Photo, Electrocatalysis
• Dirac Signature in Germanene on Semiconducting Substrate
• Effective Inertial Hand Gesture Recognition Using Particle Filtering Based Trajectory Matching
• Design and Interaction Control of a New Bilateral Upper-Limb Rehabilitation Device
• A Two-Dimensional Deflection Sensor Based on Force Sensing Resistors
• A Highly Reliable Embedded Optical Torque Sensor Based on Flexure Spring
• Development of an Automatic Dispensing System for Traditional Chinese Herbs
• A Computing Method to Determine the Performance of an Ionic Liquid Gel Soft Actuator
• Robot-Assisted Hybrid Esophagectomy Is Associated with a Shorter Length of Stay Compared to Conventional Transthoracic Esophagectomy: A Retrospective Study
• Research on Trajectory Planning and Autodig of Hydraulic Excavator

• Passing corrupt data across network layers: an overview of recent developments and issues
• Creating the environment for the prosperity of cloud computing technology
• The study of response of wide band gap semiconductor detectors using the geant4
• Effect of nanopore length on the translocation process of a biopolymer: numerical study
• Functional carbon nanotube/mesoporous carbon/mno2 hybrid network for high-performance supercapacitors
• Sun sponges for light harvesting
• Perception neural networks for active noise control systems
• Decision of numerical problems with symbolic methods
• Genesis of detection
• Solid-phase immunoassay of polystyrene-encapsulated semiconductor coreshells for cardiac marker detection
• Synthesis and characterization of optically active fractal seed mediated silver nickel bimetallic nanoparticles
• Partial reset: an alternative dft approach
• Enhanced thermal and mechanical properties of epoxy composites by mixing thermotropic liquid crystalline epoxy grafted graphene oxide
• Metal dependence of signal transmission through molecularquantum-dot cellular automata (qca): a theoretical studyon fe, ru, and os mixed-valence complexes
• Computational simulation on a coaxial substream powder feeding laval nozzle of cold spraying

• Liquid Metal‐Based Multifunctional Micropipette for 4D Single Cell Manipulation
• Cold Vapor Generation beyond the Input Solar Energy Limit
• Smart Surgical Catheter for C‐Reactive Protein Sensing Based on an Imperceptible Organic Transistor
• Light‐Ultrasound Driven Collective “Firework” Behavior of Nanomotors
• Ultrahigh Power Factor in Thermoelectric System Nb_0.95M_0.05FeSb (M = Hf, Zr, and Ti)
• All-in-One Wafer-Level Solution for MMIC Automatic Testing
• Energy Reduction Multipath Routing Protocol for MANET Using Recoil Technique
• Stand-Alone Microgrid Inverter Controller Design for Nonlinear, Unbalanced Load with Output Transformer
• Response Optimization of a Chemical Gas Sensor Array using Temperature Modulation
• Suppression of the Second Harmonic Subgroup Injected by an AC EAF: Design Considerations and Performance Estimation of a Shunt APF

• A study regarding the efficiency of the electromagnetic induction thermal treatment process depending to the work frequency

• Enhanced seamless handover algorithm for wimax and lte roaming

• Nanostructure formations and improvement in corrosion resistance of steels by means of pulsed electron beam surface treatment
• Hybrid battery with bi-directional dc/dc converter
• A new 2-way multi-level partitioning algorithm
• Multiuser scheduling on the downlink of an lte cellular system
• Passing corrupt data across network layers: an overview of recent developments and issues
• Creating the environment for the prosperity of cloud computing technology
• The study of response of wide band gap semiconductor detectors using the geant4
• Effect of nanopore length on the translocation process of a biopolymer: numerical study
• Electromagnetic identification of dielectric materials
• Nanostructure formations and improvement in corrosion resistance of steels by means of pulsed electron beam surface treatment
• Hybrid battery with bi-directional dc/dc converter
• A new 2-way multi-level partitioning algorithm
• Multiuser scheduling on the downlink of an lte cellular system
• Simultaneous Imaging of Ribonucleic Acid and Hydrogen Sulfide in Living Systems with Distinct Fluorescence Signals Using a Single Fluorescent Probe
• Recent Advances in Designing High‐Capacity Anode Nanomaterials for Li‐Ion Batteries and Their Atomic‐Scale Storage Mechanism Studies
• Highly Adaptable and Biocompatible Octopus‐Like Adhesive Patches with Meniscus‐Controlled Unfoldable 3D Microtips for Underwater Surface and Hairy Skin
• A Novel Calcium‐Ion Battery Based on Dual‐Carbon Configuration with High Working Voltage and Long Cycling Life
• Nanoscale Artificial Plasmonic Lattice in Self‐Assembled Vertically Aligned Nitride–Metal Hybrid Metamaterials
• Shielding Effectiveness Analysis and Modification of the Coupling Effect Transmission Line Method on Cavities with Multi-Sided Apertures
• Photovoltaic-STATCOM with Low Voltage Ride through Strategy and Power Quality Enhancement in a Grid Integrated Wind-PV System
• Real-Time Detection of Important Sounds with a Wearable Vibration Based Device for Hearing-Impaired People
• Quantification of the Impact of Photon Distinguishability on Measurement-Device- Independent Quantum Key Distribution
• Robust Offset-Free Speed Tracking Controller of Permanent Magnet Synchronous Generator for Wind Power Generation Applications

• A New Method of Designing Circularly Symmetric Shaped Dual Reflector Antennas Using Distorted Conics
• Congresos, Seminarios y Cursos
• Recognition of Faces in Unconstrained Environments: A Comparative Study
• Numerical Investigation on Hydrogen-Fueled Scramjet Combustor with Parallel Strut Fuel Injector at a Flight Mach Number of 6
• Intelligent macromolecules for smart devices
• Non-Equidistant Multivariable Model MGRM (1,n) Based on Vector Valued Continued Fraction and Reciprocal Accumulated Generating Operation
• Building biomedical materials layer-by-layer
• Slitting criterion for various rolling speeds in MSR rolling process
• Approaches for Modelling the Residual Service Life of Marine Concrete Structures
• The Microstructures and Electrical Resistivity of (Al, Cr, Ti)FeCoNiOx High-Entropy Alloy Oxide Thin Films
• IUMRS ‘Somiya Award forinternational cooperation’
• Slow Motion and Zoom in HD Digital Videos Using Fractals
• Mode Switching for the Multi-Antenna Broadcast Channel Based on Delay and Channel Quantization
• Dynamic instability of the hard turning process
• Decomposed Implicit Models of Piecewise - Linear Networks
• Carbon materials for drug delivery & cancer therapy
• Adaptive Wind Generation Modeling by Fuzzy Clustering of Experimental Data
• An SAR-ISAR Hybrid Imaging Method for Ship Targets Based on FDE-AJTF Decomposition
• Design and Application Space Exploration of a Domain-Specific Accelerator System
• Supercapacitor Electro-Mathematical and Machine Learning Modelling for Low Power Applications
• Analysis, Design, and Experimental Validation of a Primary Side Current-Sensing Flyback Converter for Use in a Battery Management System

• Biotinylated Bilirubin Nanoparticles as a Tumor Microenvironment‐Responsive Drug Delivery System for Targeted Cancer Therapy
• B, N Codoped and Defect‐Rich Nanocarbon Material as a Metal‐Free Bifunctional Electrocatalyst for Oxygen Reduction and Evolution Reactions
• LncRNA MT1DP Aggravates Cadmium‐Induced Oxidative Stress by Repressing the Function of Nrf2 and is Dependent on Interaction with miR‐365
• FeO_x‐Based Materials for Electrochemical Energy Storage
• Progress and Promise of Nitric Oxide‐Releasing Platforms

• Evolution strategies in the multipoint connections routing
• Stereometry specification of anodised and pvd coated surface of aluminium alloy
• Capacitance-voltage characteristics of gaas ion-implanted structures
• Nanosized objects in equilibrium supercritical fluids
• Design and analysis of double-gate mosfets for ultra-low power radio frequency identification (rfid): device and circuit co-design
• The effect of mutual coupling on a high altitude platform diversity system using compact antenna arrays
• Buckling of single-crystal silicon nanolines under indentation
• Maximum likelihood blind channel estimation for space-time coding systems
• Natural and controlled expansion of expanded clays for the production of lightweight aggregates
• Intelligent control framework for the feeding system in the biomass power plant
• Complex strain paths in polycrystalline copper: microstructural aspects
• A platinum monolayer core-shell catalyst with a ternary alloy nanoparticle core and enhanced stability for the oxygen reduction reaction
• Coverage and connectivity issue in wireless sensor networks
• Response analysis on electrical pulses under severe nuclear accident temperature conditions using an abnormal signal simulation analysis module
• Mechanical behaviour of steel fibre-reinforced alkali activated slag concrete

• Compartmentalized Microhelices Prepared via Electrohydrodynamic Cojetting
• Intragranular Dispersion of Carbon Nanotubes Comprehensively Improves Aluminum Alloys
• Uncovering the Binding Specificities of Lectins with Cells for Precision Colorectal Cancer Diagnosis Based on Multimodal Imaging
• A Nacre‐Like Carbon Nanotube Sheet for High Performance Li‐Polysulfide Batteries with High Sulfur Loading
• Triazatruxene: A Rigid Central Donor Unit for a D–A₃ Thermally Activated Delayed Fluorescence Material Exhibiting Sub‐
• Microsecond Reverse Intersystem Crossing and Unity Quantum Yield via
• Multiple Singlet–Triplet State Pairs

• One electron required
• Effect of increased nitrogen content on the structure and properties of tool steels
• Pn sequence preestimator scheme for ds-ss signal acquisition using block sequence estimation
• Design of a circularly polarized galileo e6-band textile antenna by dedicated multiobjective constrained pareto optimization
• Mems-reconfigurable metamaterials and antenna applications
• The application of ni for improvement of al-si-fe alloys
• A standard-compliant virtual meeting system with active video object tracking
• Upset prediction in friction welding using radial basis function neural network
• Validation of infinite impulse response multilayer perceptron for modelling nuclear dynamics
• Screening of supports for immobilization of commercial porcine pancreatic lipase
• Removal of heavy metal ions with acid activated carbons derived from oil palm and coconut shells
• A framework for neural network to make business forecasting with hybrid var and ga components
• Precise temperature calibration for laser heat treatment
• Size effects on thermal properties of thin metal films with rough surfaces
• Contribute to quantitative identification of casting defects based on computer analysis of x-ray images

• Tailoring TiO₂ Nanotube‐Interlaced Graphite Carbon Nitride Nanosheets for Improving Visible‐Light‐Driven Photocatalytic Performance
• Application of the CRISPR/Cas9 System to Drug Resistance in Breast Cancer
• Room‐Temperature Nanoseconds Spin Relaxation in WTe₂ and MoTe₂ Thin Films
• 3D Visible‐Light Invisibility Cloak
• Atomic Scale Modulation of Self‐Rectifying Resistive Switching by Interfacial Defects

• Optimization of training signal transmission for estimating mimo channel under antenna mutual coupling conditions
• External thermal insulation composite systems: critical parameters for surface hygrothermal behaviour
• Effect of heat input on microstructure and hardness distribution of laser welded si-al trip-type steel
• Surface evolution during semiconductor processing
• Stabilization of the distribution of the product output in adaptive receivers noise signal
• Prediction of future values of random quantities based on previously observed data
• On the capacity of densely packed arrays with mutual coupling and correlated noise
• Ka band phase locked loop oscillator dielectric resonator oscillator for satellite ehf band receiver
• Numerical simulation of heat removal from low dimensional nanostructures
• Computationally efficient blind code synchronization for asynchronous ds-cdma systems with adaptive antenna arrays
• Physicochemical properties of gold nanostructures deposited on glass
• Effect of fibre arrangement on the multiaxial fatigue of fibrous composites: a micromechanical computational model
• Electrical conduction of polyimide films prepared from polyamic acid (paa) and pre-imidized polyimide (pi) solution
• Microlens arrays with integrated pores
• Synthesis and mechanical properties of a calcium sulphoaluminate cement made of industrial wastes

• In Situ One‐Pot Synthesis of MOF–Polydopamine Hybrid Nanogels with Enhanced Photothermal Effect for Targeted Cancer Therapy
• Tissue Engineering: 3D Fabrication with Integration Molding of a Graphene Oxide/Polycaprolactone Nanoscaffold for Neurite Regeneration and Angiogenesis (Adv. Sci. 4/2018)
• Thin‐Film Solar Cells: Cation Substitution in Earth‐Abundant Kesterite Photovoltaic Materials (Adv. Sci. 4/2018)
• Masthead: (Adv. Sci. 4/2018)
• Sensitized Photocathodes: Recent Advances in Sensitized Photocathodes: From Molecular Dyes to Semiconducting Quantum Dots (Adv. Sci. 4/2018)
• A Novel Effective Multipath Routing Technique Providing High Availability in Wireless Networks
• Power Efficient Fully Differential Bulk Driven OTA for Portable Biomedical Application
• DoA and DoD Estimation and Hybrid Beamforming for Radar-Aided mmWave MIMO Vehicular Communication Systems
• New Wafer Alignment Process Using Multiple Vision Method for Industrial Manufacturing
• Development of EOG-Based Human Computer Interface (HCI) System Using Piecewise Linear Approximation (PLA) and Support Vector 

• A comparative investigation on strain induced crystallization for graphene and carbon nanotubes filled natural rubber composites
• Air conditioning compressor air leak detection by image processing techniques for industrial applications
• Experimental investigation of turbulence specifications of turbidity currents
• Cochlear implant speech processing using wavelet transform
• A new method of designing circularly symmetric shaped dual reflector antennas using distorted conics
• Congresos, seminarios y cursos
• Recognition of faces in unconstrained environments: a comparative study
• Approaches for modelling the residual service life of marine concrete structures 

• The microstructures and electrical resistivity of (al, cr, ti)feconiox high-entropy alloy oxide thin films
• Iumrs ‘somiya award forinternational cooperation’
• Slow motion and zoom in hd digital videos using fractals
• Mode switching for the multi-antenna broadcast channel based on delay and channel quantization
• Dynamic instability of the hard turning process
• Decomposed implicit models of piecewise - linear networks
• Carbon materials for drug delivery & cancer therapy
• Samples move onto the small stage
• Preparation and characterization of novel thermoset polyimide and polyimide-peo doped with licf3so3
• Human Posture Identification Using a MIMO Array
• Analysis of Network Attack and Defense Strategies Based on Pareto Optimum
• Comparative Analysis of Si- and GaN-Based Single-Phase Transformer-Less PV Grid-Tied Inverter
• Automated Scalable Address Generation Patterns for 2-Dimensional Folding Schemes in Radix-2 FFT Implementations
• Performance Comparison of Geobroadcast Strategies for Winding Roads

• Etude exploratoire xml/svg
• Searching for optimal paths in long-range contact networks.
• Quantum automata and algebraic groups.
• Rhombus tilings:decomposition and space structure.
• Graph encoding of 2d-gon tilings.
• A portable and efficient communication library for high-performance cluster computing
• Mpich/madeleine: a true multi-protocol mpi for high performance network
• Dense linear algebra kernels on heterogeneous platforms: redistribution issue
• Similar constructive method for solving a nonlinearly spherical percolation model
• Using a cellular automata-markov model to reconstruct spatial land-use patterns in zhenlai county, northeast china
• Semantic business intelligence - a new generation of business intelligence
• Comparing an fpga to a cell for an image processing application 
• Rich: region-based intelligent cluster-head selection and node deployment strategy in concentric-based wsns
• Estimation of time-varying coherence and its application in understanding brain functional connectivity
• Design and implementation of a fpga and dsp based mimo radar imaging system
• Multi-Peak Double-Dwell GPS Weak Signal Acquisition Method and VLSI Implementation for Energy-Constrained Applications
• Maximum Likelihood-Based Methods for Target Velocity Estimation with Distributed MIMO Radar
• A Tunable Polarization-Dependent Terahertz Metamaterial Absorber Based on Liquid Crystal
• A Cross-Layer Biometric Recognition System for Mobile IoT Devices
• Design of a Low-Cost Microstrip Directional Coupler with High Coupling for a Motion

• Abstract geometrical computation: turing-computing ability and unpredictable accumulations (extended abstract).
• Bruit: bandwidth reservation under interferences influence
• The limit theory of generic polynomials
• On edge tricolorations of triangulations of simply connected surfaces
• Motivations for an arbitrary precision interval arithmetic and the mpfi library
• Accelerating floating-point division when the divisor is known in advance
• Straight-line computation of the polynomial matrix inverse
• A doubling dimension threshold $\theta(\log\log n)$ for augmented graph navigability
• Etude bibliométrique sur la télécommunication par satellite : analyse statistique
• Etude exploratoire xml/svg
• Searching for optimal paths in long-range contact networks.
• Quantum automata and algebraic groups.
• Graph encoding of 2d-gon tilings.
• Synthèse bibliographique sur l'affaiblissement de propagation radioélectrique par pénétration dans les bâtiments
• Etude bibliométrique sur la télécommunication par satellite : analyse statistique
• A Compact In-Line Waveguide-to-Microstrip Transition in the Q-Band for Radio Astronomy Applications
• A 3D Printing Model Watermarking Algorithm Based on 3D Slicing and Feature Points
• eA Simple and Efficient Adaptive ISM-Band Antenna Based on a Reconfigurable Optically Driven Parasitic Structure
• Neural Network Based Maximum Power Point Tracking Control with Quadratic Boost Converter for PMSG—Wind Energy Conversion System
• RFID 3D-LANDMARC Localization Algorithm Based on Quantum Particle Swarm 

• Gestion des fonctions de sécurité par automate programmable dédié à la sécurité (apids).
• Second order function approximation with a single small multiplication
• Distributed computing power : from local function to global computing
• Towards an ipv6-based security framework for distributed storage resources
• Could any graph be turned into a small-world?
• Détection des franchissements de rouge sur 13 entrées de 5 carrefours de la zelt
• The infinite versions of logspace!=p are consistent with the axioms of set theory.
• Further reducing the redundancy of a notation over a minimally redundant digit set.
• Transfer theorems via sign conditions
• A portable and adaptive multi-protocol communication library for multithreaded runtime systems
• Bound on run of zeros and ones for images of floating-point numbers by algebraic functions.
• The topological entropy of iterated piecewise affine maps is uncomputable.
• Dagsim: a simulator for dag scheduling algorithms
• Small an optimal algorithm to generate tilings.
• A myrinet firmware development experience
• Power Control for Device-to-Device Communication with a Hybrid Relay Mode in Unequal Transmission Slots
• Fault Diagnosis Using Improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise and Power-Based Intrinsic Mode Function Selection Algorithm
• Graphene Ink Film Based Electrochemical Detector for Paracetamol Analysis
• Extended Kalman Filter Based Sliding Mode Control of Parallel-Connected Two Five-Phase PMSM Drive System
• Analyzing the Profile Effects of the Various Magnet Shapes in Axial Flux PM Motors by Means of 3D-FEA

• A Case Study on the Selection of Purification Project of Lake
• Physical properties and haemocompatibility of passive-carbon layer
• Differential Space-Time Block Code Modulation for DS-CDMA Systems
• Processing features of audio and video files
• Surfaces of colloidal PbSe nanocrystals probed by thin-film positron annihilation spectroscopy
• Askew to bring about merger
• Review of the Remaining Useful Life Prognostics of Vehicle Lithium-Ion Batteries Using Data-Driven Methodologies
• Building an Interoperability Test System for Electric Vehicle Chargers Based on ISO/IEC 15118 and IEC 61850 Standards
• Metrics for Polyphonic Sound Event Detection
• A Fast Reactive Power Optimization in Distribution Network Based on Large Random Matrix Theory and Data Analysis
• Nanosciences et nanotechnologies, deux domaines d'importance : la nano-optique et la nanoélectronique
• Intégration d'une tâche de contrôle dans l'activité d'opérateurs de fabrication : le cas d'un atelier d'électronique.
• On-the-fly range reduction.
• Second order function approximation with a single small multiplication
• Distributed computing power : from local function to global computing
• Improving the Propagation Environment by Using Tunable Passive Repeater
• Low-Complexity PAPR Reduction Scheme Combining Multi-Band Hadamard Precoding and Clipping in OFDM-Based Optical Communications
• Delay Bounded Multi-Source Multicast in Software-Defined Networking
• Automatic EMI Filter Design for Power Electronic Converters Oriented to High Power Density
• Laboratory Experiment of Blind Adaptive Array with Subcarrier Transmission Power Assignment in Spectrum Superposing Scenarios

• Assessing Task Migration Impact on Embedded Soft Real-Time Streaming Multimedia Applications
• Adaptive Jamming Suppression in Coherent FFH System Using Weighted Equal Gain Combining Receiver over Fading Channels with Imperfect CSI
• Analysis of a Compact Wideband Slotted Antenna for Ku Band Applications
• Nanoscale achievement
• Building in porosity
• Efectos de la exposición a vacío y aire de películas de SnO2 con distinto espesor
• Feasibility study of the university of Utah TRIGA reactor power upgrade - Part I: Neutronics-based study in respect to control rod system requirements and design
• Study on the experiments of the relationship between the geometric dimensions of flexural vibration disk and its vibration characteristics
• Removal of Chromium (III) from Water by Using Modified and Nonmodified Carbon Nanotubes
• Mathematical Model of Linear Switched Reluctance Motor with Mutual Inductance Consideration
• Petri Net-based Analysis of the Safety Communication Protocol
• DNA lines up to be counted
• Adhesion properties of styrene-butadiene rubber (SBR)/Standard Malaysian Rubber (SMR L)-based adhesives in the presence of phenol formaldehyde resin
• Harmonic Suppressed Slot Antennas Using Rectangular/Circular Defected Ground Structures
• The numerical method of inverse Laplace transform for calculation of overvoltages in power transformers and test results
• Supercapacitors in Tandem with Batteries to Prolong the Range of UGV Systems
• A Low-Cost Maximum Power Point Tracking System Based on Neural Network Inverse Model Controller
• Antenna Design by Means of the Fruit Fly Optimization Algorithm
• The Impact of Antenna Height on 3D Channel: A Ray Launching Based Analysis
• Collision Detection Method Using Self Interference Cancelation for Random Access Multiuser MIMO

• stochastic object-based graph grammars

• formation of a well-ordered aluminium oxide overlayer by oxidation of nial(110)

• comparison of gsm, wcdma and lte performance on 900mhz band

• a tactic language for refinement of state-rich concurrent specifications

• Multistatic Wireless Fidelity Network Based Radar – Results of the Chrcynno Experiment
• Inductance, electrically adjusted by semiconductor structure
• Adaptive Kernel Canonical Correlation Analysis Algorithms for Nonparametric Identification of Wiener and Hammerstein Systems
• Iterative Frequency-Domain Channel Estimation and Equalization for Ultra-Wideband Systems with Short Cyclic Prefix
• Numerical model of phase transformation of steel C80U during hardening
• SiGe oxide nanowires push Si into the blue
• Preparation of Modified Kaolin Filler with Cesium and Its Application in Security Paper
• Signal Strength Based Indoor and Outdoor Localization Scheme in Zigbee Sensor Networks
• Elliptical modification of trilateration method based on linear model of distance vs power ratio for RFID tags spatial localization
• Bone Regeneration Using a Mixture of Silicon-Substituted Coral HA and β-TCP in a Rat Calvarial Bone Defect Model
• Pulsed Laser Deposition of BaTiO3 Thin Films on Different Substrates

State estimation in free-radical polymerization reactors using a nonlinear interconnected high gain observer

• Applicability of Dimedone Assays for the Development of Online Aldehyde Sensor in Seawater Flooding Systems
• Theoretical and Experimental Study of Explosion Limits and the Inhibition of Flammable Refrigerants
• Morpho-Syntactic Tagging of Text in “Baoule” Language Based on Hidden Markov Models (HMM)
• A Review of Gaps between Usability and Security/Privacy
• A Coefficient Diagram Method Controller with Backstepping Methodology for Robotic Manipulators
• Minor subspace tracking using MNS technique
• Analytical Electromagnetic Analysis of Multi-Phases Cage Rotor Induction Motors in Healthy, Broken Bars and Open Phases Conditions
• NonLinear Analytical Calculation of Magnetic Field and Torque of Switched
• A Hybrid PSO-PI based Maximum Power Point Tracking algorithm using adaptive sampling time strategy
• Flywheel energy storage system with induction machine associated to a variable-speed wind generator
• A Coefficient Diagram Method Controller with Backstepping Methodology for Robotic Manipulators
• Proportional-Integral/Backstepping control and high-gain observer for induction motor drives
• Nouvelle Topologie des Convertisseurs Multicellulaires Dédiés à la Commande Tolérante aux Défauts
• Flywheel energy storage system with induction machine associated to a variable-speed wind generator

• Modeling and Control of Wind Power Conversion System with a Flywheel Energy Storage System and Compensation of Reactive Power
• Study and Realization of Device of Solar Sensitive Tracking for a Prototype of Cylindro-Parabolic Concentrator
• Optimization Methodologies of Mixed Electrical Generators in Algeria Based on Renewable Application to Telecommunications System
• Modeling, analysis and comparison of solar photovoltaic array configurations under partial shading conditions
• Design of nonlinear PID-smith predictor controllers with large time delays
• A Lossless hybrid wavelet-fractal compression for welding radiographic images
• A Wavelet-Based Forward BSS Algorithm for Acoustic Noise Reduction and Speech Enhancement.
• The analytical, numerical and neural network evaluation versus experimental of electromagnetic shielding effectiveness of a rectangular enclosure with apertures
• Combined model for shielding effectiveness estimation of a metallic enclosure with apertures
• Numerical and Analytical Study of the Behavior of the HF Electromagnetic Field on the Surface of the Thin Layer
• Influence of discontinuous pollution width on the surface conduction. Frequency characteristics of the leakage current
• Signal Processing Techniques for Power Cables Insulation Diagnosis under Thermal Ageing Conditions
• Electrostatic filtration of submicron particles using nanosecond pulsed dielectric barrier discharge in planar configuration
• Frequency effect on particles collection efficiency in planar DBD-ESP
• ubmicron particles trajectory and collection efficiency in a miniature planar DBD-ESP: Theoretical model and experimental validation

•      Transient rotor current analysis of connected induction generator during grid disturbance
•     Application of indirect field oriented control with optimum flux for induction machines drives
•     Estimation of the External Performances of PMSM Using Artificial Neural Networks Based on FE Results
•      Stator faults in induction machine and its influence on the vector control
•      A novel method for modeling magnetic saturation in the main flux of induction machine
•     A new Proposed Method for Minimizing the bandwidth and profile of square matrices for triangular finite element mesh.
•     Time-harmonic finite element analysis of an induction machine with an air-gap interface coupling
•      Bandwidth and Profile Minimization for Triangular Meshes of Cylindrical Geometries
•     Optimal sizing method for stand-alone hybrid PV/wind power generation system
•      Optimisation d’un système hybride (éolien–photovoltaïque) totalement autonome
•      Generalized two axes model of a squirrel-cage induction motor for rotor fault diagnosis
•      Novel loss optimization in induction machines with optimum rotor flux control
•      Design optimization of two synchronous reluctance machine structures with maximized torque and power factor
•      Analytical calculation of parallel double excitation and spoke-type permanent-magnet motors; simplified versus exact model
•      Numerical analysis of brushless permanent magnet motors using Lagrange multiplier

•       Second Order Function Approximation with a Single Small Multiplicatio
•    Distributed computing power : from local function to global computing
•    Towards an IPv6-based Security Framework for Distributed Storage Resources
•    QRS detection based on wavelet coefficients.
• Detecting Specific Health-Related Events Using an Integrated Sensor System for Vital Sign Monitoring
• An automated program for mental stress and apnea/hypopnea events detection
• Development of ECG beat segmentation method by combining lowpass filter and irregular R–R interval checkup strategy
• Sleep–wake stages classification and sleep efficiency estimation using single-lead electrocardiogram
• Detection of epileptics during seizure free periods
• Theoretical Investigation of Electronic and Optical Properties of Si/SiGe Quantum Cascade Structures
• Structural Properties of Synthetic Na-Hectorite Exchanged with Heavy Metals
• Theoretical Study of Kaolinite Structure; Energy Minimization and Crystal Properties
• Computation of the Smith Form for Multivariate Polynomial Matrices Using Maple
• Robust Parametric Modeling of Speech in Additive White Gaussian Noise
• Surface Waves Excitation in Magnetized Spin Quantum Plasmas

• High Moments Jarque-Bera Tests for Arbitrary Distribution Functions
• A Simple and Efficient Procedure for a 2-Pyridones Synthesis under Solvent-Free Conditions
• Bone Mineral Density in Patients with Newly Diagnosed Inflammatory Bowel Disease: Frequency and Risk Factors in Tunisian Population. Results of a Prospective Study
• An Innovative Solutions for the Generalized FitzHugh-Nagumo Equation by Using the Generalized (G'/G)-Expansion Method
• Study of Stability and Vibration Reduction in Multi-Tool Ultrasonic Machining under Simultaneous Primary and Internal Resonance
• Impact of biomass in Egypt on climate change
• Electrodeposition and Characterization of Cu(In, Al)Se₂ for Applications in Thin Film Tandem Solar Cells
• Non-Fatal Occupational Injuries and Safety Climate: A Cross-Sectional Study of Construction Building Workers in Mit-Ghamr City, Dakahlia Governorate, Egypt
• The Differential Quadrature Solution of Reaction-Diffusion Equation Using Explicit and Implicit Numerical Schemes
• An Efficient Method to Solve Thermal Wave Equation
• 3D Recognition Using Affine Invariants
• A Topological Magueijo-Smolin Varying Speed of Light Theory, the Accelerated Cosmic Expansion and the Dark Energy of Pure Gravity
• Accelerating Floating-Point Division When the Divisor is Known in Advance
•  Straight-line computation of the polynomial matrix inverse
• A Doubling dimension Threshold $\Theta(\log\log n)$ for augmented graph navigability

•   Synthèse bibliographique sur l'affaiblissement de propagation radioélectrique par pénétration dans les bâtiments
•  Etude bibliométrique sur la télécommunication par satellite : analyse statistique
• Etude exploratoire XML/SVG
•  Searching for optimal paths in long-range contact networks.
•  Quantum automata and algebraic groups.
•  Rhombus tilings:decomposition and space structure.
• Graph encoding of 2D-gon tilings.
•   A portable and efficient communication library for high-performance cluster computing
• MPICH/Madeleine: a True Multi-Protocol MPI for High Performance Network
•   Dense Linear Algebra Kernels on Heterogeneous Platforms: Redistribution Issue
• Analysis of Platinum Content in Used Auto Catalytic Converter Carriers and the Possibility of its Recovery
• Ultra-Wideband Coplanar-Fed Monopoles: A Comparative Study
• Electrical Transport and Magnetoresistance in Single-Wall Carbon Nanotubes Films
• Diversity of hydrogen configuration and its roles in SrTiO3−δ
• Rotor Speed Estimation Method Used in Dynamic Control of the Induction Motor

•         Similar Constructive Method for Solving a nonlinearly Spherical Percolation Model
•         Using a Cellular Automata-Markov Model to Reconstruct Spatial Land-Use Patterns in Zhenlai County, Northeast China
•         Semantic Business Intelligence - a New Generation of Business Intelligence
• Nanosciences et nanotechnologies, deux domaines d'importance : la nano-optique et la nanoélectronique
• Intégration d'une tâche de contrôle dans l'activité d'opérateurs de fabrication : le cas d'un atelier d'électronique.
• On-the-fly Range Reduction.
• Second Order Function Approximation with a Single Small Multiplication
• Distributed computing power : from local function to global computing
• Gestion des fonctions de sécurité par automate programmable dédié à la sécurité (APIdS). 
• Second Order Function Approximation with a Single Small Multiplication
• Distributed computing power : from local function to global computing
• Error Threshold for Individual Faulty Gates Using Probabilistic Transfer Matrix (PTM)
• A Novel Imaging Approach of Web Documents based on Semantic Inclusion of Textual and Non – Textual Informatio

• Towards an IPv6-based Security Framework for Distributed Storage Resources
• Could any graph be turned into a small-world?
• Détection des franchissements de rouge sur 13 entrées de 5 carrefours de la ZELT
• The Infinite Versions of LogSpace!=P Are Consistent with the Axioms of Set Theory.
• Further reducing the redundancy of a notation over a minimally redundant digit set.
• Transfer theorems via sign conditions
• A Portable and Adaptive Multi-Protocol Communication Library for Multithreaded Runtime Systems
• Bound on Run of Zeros and Ones for Images of Floating-Point Numbers by Algebraic Functions.
• The topological entropy of iterated piecewise affine maps is uncomputable.
• DAGSim: A Simulator for DAG Scheduling Algorithms
• Small An optimal algorithm to generate tilings.
• A Myrinet firmware development experience
• Abstract geometrical computation: Turing-computing ability and unpredictable accumulations (extended abstract).

• BRuIT: Bandwidth Reservation under InTerferences influence
• The limit theory of generic polynomials
• On edge tricolorations of triangulations of simply connected surfaces
• Motivations for an arbitrary precision interval arithmetic and the MPFI library
• Accelerating Floating-Point Division When the Divisor is Known in Advance
• Straight-line computation of the polynomial matrix inverse
• A Doubling dimension Threshold $\Theta(\log\log n)$ for augmented graph navigability
• Etude bibliométrique sur la télécommunication par satellite : analyse statistique
• Etude exploratoire XML/SVG
• Searching for optimal paths in long-range contact networks.
• Quantum automata and algebraic groups.
• Graph encoding of 2D-gon tilings.
• Synthèse bibliographique sur l'affaiblissement de propagation radioélectrique par pénétration dans les bâtiments
• Etude bibliométrique sur la télécommunication par satellite : analyse statistique
• Etude exploratoire XML/SVG

• Searching for optimal paths in long-range contact networks.
• Quantum automata and algebraic groups. 
• Rhombus tilings:decomposition and space structure.
• Graph encoding of 2D-gon tilings.
• A portable and efficient communication library for high-performance cluster computing
• MPICH/Madeleine: a True Multi-Protocol MPI for High Performance Network
• Dense Linear Algebra Kernels on Heterogeneous Platforms: Redistribution Issue
• Similar Constructive Method for Solving a nonlinearly Spherical Percolation Model 

• Using a Cellular Automata-Markov Model to Reconstruct Spatial Land-Use Patterns in Zhenlai County, Northeast China

• Semantic Business Intelligence - a New Generation of Business Intelligenc 

• Comparing an FPGA to a Cell for an Image Processing Application
• Rich: Region-based Intelligent Cluster-Head Selection and Node Deployment Strategy in Concentric-based WSNs
• Estimation of Time-Varying Coherence and Its Application in Understanding Brain Functional Connectivity
• Design and Implementation of a FPGA and DSP Based MIMO Radar Imaging System
• A comparative investigation on strain induced crystallization for graphene and carbon nanotubes filled natural rubber composites
• Air Conditioning Compressor Air Leak Detection by Image Processing Techniques for Industrial Applications
• Experimental Investigation of Turbulence Specifications of Turbidity Currents
• Cochlear Implant Speech Processing Using Wavelet Transform

• Samples move onto the small stage
• Preparation and characterization of novel thermoset polyimide and polyimide-peo doped with LiCF3SO3
• Optimization of Training Signal Transmission for Estimating MIMO Channel under Antenna Mutual Coupling Conditions
• External Thermal Insulation Composite Systems: Critical Parameters for Surface Hygrothermal Behaviour
• Effect of Heat Input on Microstructure and Hardness Distribution of Laser Welded Si-Al TRIP-Type Steel
• Surface Evolution During Semiconductor Processing
• Stabilization of the distribution of the product output in adaptive receivers noise signal
• Prediction of Future Values of Random Quantities Based on Previously Observed Data
• On the Capacity of Densely Packed Arrays with Mutual Coupling and Correlated Noise
• Ka Band Phase Locked Loop Oscillator Dielectric Resonator Oscillator for Satellite EHF Band Receiver
• Numerical Simulation of Heat Removal from Low Dimensional Nanostructures
• Computationally Efficient Blind Code Synchronization for Asynchronous DS-CDMA Systems with Adaptive Antenna Arrays
• Physicochemical Properties of Gold Nanostructures Deposited on Glass
• Effect of fibre arrangement on the multiaxial fatigue of fibrous composites: a micromechanical computational model
• Electrical conduction of polyimide films prepared from polyamic acid (PAA) and pre-imidized polyimide (PI) solution 

• Effect of increased nitrogen content on the structure and properties of tool steels
• PN Sequence Preestimator Scheme for DS-SS Signal Acquisition Using Block Sequence Estimation
• Design of a Circularly Polarized Galileo E6-Band Textile Antenna by Dedicated Multiobjective Constrained Pareto Optimization
• MEMS-Reconfigurable Metamaterials and Antenna Applications
• The application of ni for improvement of al-si-fe alloys
• A Standard-Compliant Virtual Meeting System with Active Video Object Tracking
• Upset Prediction in Friction Welding Using Radial Basis Function Neural Network
• Validation of Infinite Impulse Response Multilayer Perceptron for Modelling Nuclear Dynamics
• Screening of supports for immobilization of commercial porcine pancreatic lipase
• Removal of Heavy Metal Ions with Acid Activated Carbons Derived from Oil Palm and Coconut Shells
• A framework for neural network to make business forecasting with hybrid VAR and GA components
• Precise temperature calibration for laser heat treatment
• Size Effects on Thermal Properties of Thin Metal Films With Rough Surfaces
• Contribute to quantitative identification of casting defects based on computer analysis of X-ray images
• Microlens arrays with integrated pores

• Synthesis and mechanical properties of a calcium sulphoaluminate cement made of industrial wastes
• Evolution Strategies in the Multipoint Connections Routing
• Stereometry specification of anodised and PVD coated surface of aluminium alloy
• Capacitance-voltage characteristics of GaAs ion-implanted structures
• Nanosized objects in equilibrium supercritical fluids
• Design and Analysis of Double-Gate MOSFETs for Ultra-Low Power Radio Frequency Identification (RFID): Device and Circuit Co-Design
• The Effect of Mutual Coupling on a High Altitude Platform Diversity System Using Compact Antenna Arrays
• Buckling of Single-Crystal Silicon Nanolines under Indentation
• Maximum Likelihood Blind Channel Estimation for Space-Time Coding Systems
• Natural and controlled expansion of expanded clays for the production of lightweight aggregates
• Intelligent Control Framework for the Feeding System in the Biomass Power Plant
• Complex strain paths in polycrystalline copper: microstructural aspects
• A Platinum Monolayer Core-Shell Catalyst with a Ternary Alloy Nanoparticle Core and Enhanced Stability for the Oxygen Reduction Reaction
• Coverage and Connectivity Issue in Wireless Sensor Networks
• Response Analysis on Electrical Pulses under Severe Nuclear Accident Temperature Conditions Using an Abnormal Signal Simulation Analysis Module

• Mechanical behaviour of steel fibre-reinforced alkali activated slag concrete
• Nanopositioner family
• A Study Regarding the Efficiency of the Electromagnetic Induction Thermal Treatment Process Depending to the Work Frequency
• Enhanced Seamless Handover Algorithm for WiMAX and LTE Roaming
• Multi-segment Printed Monopole Antenna for Multi- band Wireless Communication
• Electromagnetic identification of dielectric materials
• Nanostructure Formations and Improvement in Corrosion Resistance of Steels by Means of Pulsed Electron Beam Surface Treatment
• Hybrid battery with bi-directional DC/DC converter
• A New 2-way Multi-level Partitioning Algorithm
• Multiuser Scheduling on the Downlink of an LTE Cellular System
• Passing Corrupt Data Across Network Layers: An Overview of Recent Developments and Issues
• Creating the Environment for the Prosperity of Cloud Computing Technology
• The study of response of wide band gap semiconductor detectors using the Geant4
• Effect of Nanopore Length on the Translocation Process of a Biopolymer: Numerical Study